GenRight JK Extreme Coilover Suspension Package 2door

SKU: GRCSKJK2

Price: $19,999.99

Compatible vehicles: Jeep Wrangler JK 2DR (2007-2018)

Material: 

Description:

• This is the GenRight EXTREME (same as the Elite, but for the 2 door JK) Coil Over Long Arm & Long Travel Suspension System "Kit" for the Jeep Wrangler JK 2 door (fits 2007 to present).

  This system will stretch your 2 door JK to a 102" wheelbase (without cutting the Jeep in half). This means you get a better approach and departure angle.
  
  Unlike other kits on the market, this suspension system is designed to provide a smooth non-binding movement through the entire stroke of the suspensions travel (aka: articulation). We worked with the original factory Jeep CAD files to design this system and place the shocks in the optimal position to provide your vehicle the best articulation and dampening control for the best and most balanced ride. Yes, this package, replaces the entire Front and Rear suspension on your Jeep (JK) with the best components on the market and does it right for the last time!
  
  Another hidden feature is that the control arms are NOT connected to the center transfer case skid plate either (most other long arm kits are). This simple feature makes access to servicing the transmission, transfer case, drive shafts and exhaust much easier.
  As you can see from the price this is no "bolt-on" kit! This suspension is welded to the frame and replaces all the cheesy factory brackets and mounts with new heavy duty 1/4" thick laser cut mounts! Now, in a single click you get all of our best suspension components to convert your Jeep to coil overs!
  Yes, we have made every upgrade you could want so your Jeep can be the best in class on and off-road!
  
  This Kit Includes:

  • (1) Front 3 link Suspension Kit with all adjustable genuine Currie Johnny Joint ends
  • (1) Rear Double Triangulated 4 link Suspension Kit with all adjustable Currie Johnny Joint ends
  • (1) Front Coil over shock mount kit
  • (1) Rear Coil over shock mount kit
  • (4) Bump Can Mounts (King Shock style)
  • (1) Universal Transmission Mount
  • (4) Axle limit straps, quad wrap (SLSQ14)
  • (1) Rear Sway Bar (SWB-8003)
  • (1) 3/8" 6061-T6 Aluminum Flat Belly Skid Plate
  • (4) King 2.5" Coil Over Shocks w/ Remote Reservoir and Dual Rate Coil Springs
  • (4) King 2.0" Hydraulic Air Bump Stops
  • (1) 20 Gallon GenRight Crawler Rear Gas Tank w/ Skid (25 gal is an option).
  • (1) Front Upper Control Arm Mount (Axle Side)
  • (1) Rear Upper Control Arm Mount (Axle Side)
  • (2) Rear Shock Tower Covers
  • (1) Set of detailed installation instructions
  • 100% Made in U.S.A.

   
  This ELITE kit is the equivalent of a 3 to 4" lift. It is recommended for Jeep JK's with up to 42" tall tires (requires non-stock axles). You will want to push your front axle forward approx. 2 - 3" as you go up in tire size.
  
  All the kit pieces are made from heavy duty materials that have been proven on and off-road for years. Even raced at King of the Hammers.
  
  For individual kit contents call for price and availability.
  
  IMPORTANT NOTES:

  • This kit was designed in Solidworks with Currie VXR 60 front and Extreme 70 rear axle(s). The rotated diff covers to provide more up travel and allow the front trac bar to be straight (no bends, eliminating failure points). We order these axles built to the "GenRight specifications" (width, pinion angles, upper control arm mounts, diff covers and castor) to utilize the full potential of this kit! Clearances were designed for less than 1/16" between the moving components. The rear is Full Float 40 spline.
  • To install this kit will require cutting, bending and welding.
  • The kit will also require some minor cutting of the inner fender to accommodate your out board shocks and tires.
  • This kit requires removal of the factory fuel tank and switching to the included GenRight rear mounted JK tank (GST-8002-2).
  • This kit will require modifying the exhaust in several locations.
  • The kit is not compatible with body lifts; we do not recommend a body lift on a JK.
  • ALL options on this page are already discounted if bought with this package.
  • This kit is designed to retain the factory steering box location. We always recommend upgrading to Hydro Assist steering with 37" or bigger tires!
  • Changing the tire size and gears will require re-calibration of the factory Jeep computer (about $149) with a simple programmer.
  • Once you have placed your order online, a GenRight staff member will contact you to discuss the specifics of your build to tailor the shocks and various other part options to best suit your intended use.
  • If you choose to use non recommended parts (i.e. Axles, Steering, etc.) wecan nottech support your build/install.
  • This suspension requires running the GenRight 3/8" flat belly skid plate at all times AND that the bolts be tight. The skid plate is an integral part of the suspension system.